features 1 of 5 optimum technology matching ? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. inp hbt ldmos rf mems rf3023 broadband medium power spdt switch the rf3023 is a gaas phemt single-pole double-throw (spdt) switch designed for general purpose switching applications which require very low insertion loss, moderate isolation, and medium power handling capa- bility. the rf3023 is ideally suited for battery-powered and low control voltage applications. ? 300 khz to 4 ghz operation ? 0.25 db insertion loss at 1 ghz ? 26 db isolation at 2 ghz ? 1.8 v minimum control volt- age ? 28 dbm p0.1 db at 3 v ? 18 dbm p0.1 db at 1.8 v ? 58 dbm ip3 at 3 v applications ? cellular handset applications ? antenna tuning applications ? ieee 802.11b/g wlan appli- cations ? cellular infrastructure appli- cations ds101111 ? package: sc70, 6-pin rf3023 parameter specification unit condition min. typ. max. insertion loss 0.25 db 1 ghz 0.3 0.4 db 2 ghz 0.45 db 3 ghz vswr 1.15 1 ghz 1.2 2 ghz 1.33 3 ghz isolation 26 db 1 ghz 22 26 db 2 ghz 27 db 3 ghz p1db 31 dbm 1 ghz 32 dbm 2 ghz p0.1 db 28 dbm 1 ghz ip3 60 dbm 1 ghz, 1 mhz spacing, 15 dbm per tone 58 dbm 2 ghz, 1 mhz spacing, 15 dbm per tone t on , t off 40 ns 50% of v ctrl to 10/90% of rf t rise , t fall 30 ns 10/90% rf test conditions: 3.0 v, 50 ? , 25c, with application circuit shown herein.
2 of 5 ds101111 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. rf3023 switch control settings evaluation board schematic absolute maximum ratings parameter rating unit control voltage 7.0 v maximum input power +36 dbm operating temperature -40 to +85 c storage temperature -55 to +150 c msl rating 1 control signals signal paths v1 v2 rfc-rf1 rfc-rf2 valid states 0 1 on off 1 0 off on invalid states 0 0 indeterminate state* 1 1 indeterminate state* 0: logic level low, 0 v ~ 0.2 v 1: logic level high, 1.8 v ~ 5.0 v *in indeterminate states, both signal paths are in high insertion loss states, ~10 db. caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the device under absolute maximum rating condi- tions is not implied. rohs status based on eu directive 2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 5 ds101111 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. rf3023 package drawing branding diagram pin function description 1 rf1 rf port 1. 2 gnd ground. 3 rf2 rf port 2. 4v2 rf2 control voltage. 5 rfc common rf port. 6v1 rf1 control voltage.
4 of 5 ds101111 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. rf3023 typical performance temp = 25c, v control = 3.0 v note: low frequency rl performance can be improved using larger dc blocking capacitors.
5 of 5 ds101111 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. rf3023 ordering information ordering code description rf3023 sample bag with 25 pieces rf3023sr 7? reel with 100 pieces rf3023tr7 7? reel with 2500 pieces RF3023PCK-410 500 mhz pcba with 5-piece sample bag
|
